8
Names and functions
Below is a description of the functions of the controls.
01) Power switch
This is the main power switch. Press to turn the device on or off.
02) Display
03) Disc holder
Place the disc in the holder. Push the eject (17/40) button to open and close the disc holder.
04) LCD display
05/53) Direct access buttons
Use these buttons to select a track directly. You can also use the 10+ button to move 10 tracks
forward. E.g. if your current track is 5, pushing the +10 button will select track 15.
06/49) Fast reverse button
Push and hold this button to play a track fast backwards.
07/50) Fast forward button
Push and hold this button to play a track fast forwards.
08/63) Previous button
Use this button to go back to the beginning of the current track or select the previous track to be
played.
09) Phone output
You can connect a pair of headphones with an impedance of 32 - 600 Ohm to the headphones
connector. It is a 6,3 mm (1/4”) TRS socket, wired as Tip=left, Ring=right and sleeve = ground.
Caution:
Depending on the type of headphones connected to the Headphones jack, the DVMP-250 is
capable of producing high output levels via the phones output. Therefore, make sure to turn the
control all the way to the left (minimum setting) before connecting the headphones. Be aware of
the fact that listening to loud sound pressure levels over a longer period of time leads to hearing-
damage!
10) Level control
This button is used to adjust the volume level of the phone (09) output.
11) SD port
Use this port to connect an SD card.
12) USB port
Use this port to connect a USB flash drive.
13/60) R/L button
This button allows you to assign the DVD/MP3 player’s left channel, right channel or both
(stereo) channels to the main mix.
14) IR remote sensor
15/36) Source button
Tap this button to select SD, USB or Disc as playback source.
16/48) Play/Pause button
This button allows you to toggle between pause mode and playback mode.
17/40) Eject button
Push this button to open and close the disc holder (03).
18/61) Return
This button allows you to return to the start of the current track.
19/41) Flat button
Every time this button is pushed, the pitch of the current track will decrease by one semi tone.
Total range is +/- 9 semitones.
20/45) Time button
Use this button to switch the TIME indication on the LCD display (04) between the elapsed
time and remaining time. The selected mode is indicated by ELAPSED or REMAIN.
21/56) Sharp button
Every time this button is pushed, the pitch of a current track will increase by one semi tone.
Total range is +/- 9 semitones.
22/51) Repeat button
Use this button to repeat one track or all tracks of the medium.
See the section Repeat on page 11.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale